Skip to content
Florin logoflorin

Coverage

Additional insured endorsement CG 20 37: what it covers

Shaurya Aggarwal 6 min read

Most subcontracts ask for “CG 20 10 and CG 20 37” together, and many contractors learn what the second form does only when a certificate is rejected. Here is what the CG 20 37 wording says, how its editions differ, which forms can replace it and how long to keep it.

What the CG 20 37 wording covers

ISO titles the form “Additional Insured – Owners, Lessees or Contractors – Completed Operations.” The 12 19 edition adds each person or organization named in its schedule as an insured, but only for bodily injury or property damage “caused, in whole or in part, by” your work at the scheduled location, performed for that additional insured and included in the products-completed operations hazard.

Three limits follow in the same edition:

  • Coverage applies only to the extent permitted by law. IRMI notes that California, Colorado, Kansas, Montana, New Mexico, Oregon and Texas bar additional insureds from getting broader coverage than an indemnity clause could give them.
  • If a contract requires the coverage, it is no broader than what the contract requires you to provide.
  • The most the insurer pays for the additional insured is the amount the contract requires or your policy limit, whichever is less. The endorsement does not increase your limits.

When your work counts as completed

CG 20 37 only responds to the products-completed operations hazard, so the definition of “completed” in the standard CG 00 01 policy matters. Your work is completed at the earliest of three points: all the work in your contract is done, all work at one site is done on a multi-site contract, or part of the work is put to its intended use by anyone other than another contractor on the project. Work that still needs correction or repair but is otherwise complete also counts.

That is exactly where CG 20 10 stops: COISoftware points out that its 04 13 edition excludes injury or damage after the work is completed or put to its intended use. As an illustration, a roofer finishes a warehouse and a seam fails 18 months later. A general contractor holding only CG 20 10 has no additional insured coverage for the leak; with CG 20 37 on the roofer’s current policy, it can tender the claim to the roofer’s insurer.

CG 20 37 edition dates and what changed

The four digits after the form number are the edition date, and contracts often specify one. Check the bottom corner of the endorsement page.

CG 20 37 editions (IRMI; Saxe Doernberger & Vita; ISO form text)
EditionWhat changed
10 01Created after ISO’s 2001 revisions removed completed operations from the ongoing operations form.
07 04Replaced “arising out of” your work with “caused, in whole or in part, by” your work, which is narrower.
04 13Added the limits for what the law permits and what the contract requires, and capped limits at the lesser of contract or policy.
12 19Current edition. Removed “shown in the Declarations” from the limits wording and added that the endorsement does not increase limits.

Forms that can stand in for CG 20 37

Contracts often say “CG 20 37 or equivalent.” CG 20 37 is scheduled: each client and location must be typed in. Since December 2019, ISO has offered two automatic completed operations forms. CG 20 39 covers parties you have agreed in a written contract to add, and CG 20 40 also reaches parties further up the chain, such as the owner, without a direct contract with you.

Saxe Doernberger & Vita notes two differences: both automatic forms require a written contract, while CG 20 37 does not, and both exclude professional architectural, engineering and surveying services. Many insurers also use their own blanket forms combining ongoing and completed operations; PINS Advantage advises reading them to confirm completed operations is included.

Completed operations additional insured forms (Saxe Doernberger & Vita; COISoftware)
FormHow the client is addedProfessional services
CG 20 37Named in the scheduleNot excluded
CG 20 39Automatic, written contract with youExcluded
CG 20 40Automatic, including upstream partiesExcluded
CG 20 10Ongoing operations only, not a substituteNot excluded

How long you have to keep CG 20 37

General liability usually responds on an occurrence basis, so the endorsement must be on the policy in force when the injury or damage happens, not when you did the job. Total CSR notes that CG 20 37 is not tail coverage; if a renewal drops it, later damage is not covered for your client.

Your contract sets the period. PINS Advantage says most programs require 2 to 5 years after completion, with longer periods for design-build and public projects. Statutes of repose explain the longer requests: Texas generally gives claimants 10 years after substantial completion to sue a builder, and Florida shortened its construction repose period from 10 years to 7 in 2023.

Your clients also share your limits. Under CG 00 01, limits apply regardless of how many insureds there are, so an additional insured’s completed operations claim draws down your own products-completed operations aggregate.

How to add CG 20 37 without overpaying

Billy reports that CG 20 37 is typically issued alongside CG 20 10 at no extra charge, though Total CSR notes some insurers charge a premium or review loss history first for trades such as roofing and foundation work. These steps keep the cost and the back-and-forth down:

A broker such as Florin can compare policies that already include blanket completed operations wording, so you are not requesting a new endorsement for every contract.

  • Read the contract for the form number, edition, limits and how many years after completion it requires.
  • Ask whether your policy already has a blanket additional insured endorsement that includes completed operations before paying for scheduled ones.
  • For the scheduled form, give your agent the client’s exact legal name and a location and job description that match the contract.
  • Send the endorsement page with your certificate. The ACORD 25 has one additional insured box and cannot show completed operations.
  • Confirm the endorsement carries over at every renewal, especially if you change insurers.

Frequently asked questions

Is CG 2037 the same as CG 20 37?

Yes. Contracts and certificates sometimes drop the space, but it is the same ISO form. Check the edition date that follows the number, because the wording changed between editions.

Does a certificate of insurance prove I have CG 20 37?

No. The ACORD 25 says a certificate does not give the holder rights in place of an endorsement, and it has no field for completed operations. Clients usually want the endorsement page itself.

Does CG 20 37 cover the general contractor’s own negligence?

Not by itself. The form covers injury or damage caused in whole or in part by your work, so a claim caused solely by the general contractor is generally outside it, and several states restrict this further by law.

Do I need CG 20 37 if I already have CG 20 10?

Yes, if your contract asks for completed operations coverage. CG 20 10 ends once your work is completed, which is when many construction defect claims surface.

Figures are third-party estimates and examples, not quotes. Coverage depends on the policy terms and underwriting, and rules vary by state.

← All questions